Determine the ultimate load acting on Girder AB and EI if the slab is 120 mm thick, beams are poured with a cross section of 250 mm x 300 mm, partition walls are made of chb (full grout w/ density of 21.2 kN/m3) plastered on both sides 150 mm thick and 3 meters high.

28 0

Get full Expert solution in seconds

$1.97 ONLY

Unlock Answer

Determine the ultimate load acting on Girder AB and EI if the slab is 120 mm thick, beams are poured with a cross section of 250 mm x 300 mm, partition walls are made of chb (full grout w/ density of 21.2 kN/m3) plastered on both sides 150 mm thick and 3 meters high.

Slab attachments
Celing: 9 mm Gpysum Board
Mechanical Duct Allowance(MDA)
Utilities (Note: twice the weight of MDA)
Ceramic Tile Floor Finish (20mm thick on 25 mm mortar bed)

EXPERT ANSWER